Products and services
Rooftop Installation
Rooftop power station generates electricity from solar panels mounted on the rooftop of a residential or commercial structure. Rooftop solar is increasingly cost effective, generates no carbon dioxide. Avoids the environmental risk associated with green house gases. Rooftop solar is a great step toward combating climate change Solar panels contribute to the green economy, Solar power is incredibly efficient. It can be installed quickly. Solar energy requires minimal maintenance, Solar panels have zero emissions.
Features
- CENTRAL MONITERING SYSTEM
- LOW MAINTANANCE,
- HIGH EFFICENCY
- INVESTMENT RETURN 6 YEARS
- ELECTRICAL BACK UP FOR NON SUNNY DAYS
- NO POLLUTION, ECO FRIENDLY
- ASSURE GENUINE SPARES
- CENTRAL SCADA MONITERING SYSTEM
LONG LIFE UP TO 25 YEARS
Quality
- PV MODULE IEC 61215
- Invertor IEC 61683 Std / IEC 60068
- MPPT Contoller IEC 62093 / IEC 60068
- Batteries IEC 61427 / IS 1651/IS13369
- Cable IEC 60189 / IS 694/IS1554
- Switch & Cicuit Breaker IS / IEC 60947/En 50521
- Junction Box CIP65(outdoor) IP21(indoor)
Ground Mounted
Ground-mounted solar panels are ones that are install on the ground, as opposed to the rooftop. Ground mounted solar panel systems are very easy to place, because they can be located on open land. They don’t require drilling into your roof and the bracing used in standard ground mount systems are lightweight and easy to remove. Ground mounted solar panels are very easy to access for cleaning and maintenance
Features
- Engineering, procurement & construction of the complete solar power plant including design of electrical, mechanical, instrumentation & control.
- Maintenance of the power plant, monthly data monitoring & corrective maintenance.
- Erection & commissioning of the entire solar plant
- RMSPL also provides O&M of complete solar plant
Quality
- Civil works for Module mounting structures.
- Supply of Module mounting structures.
- Fixing & Alignment of Modules.
- Module inter connections.
- Module string wiring.
- Trench work for wiring.
- Installation of Junction boxes & Junction box wiring.
- Installation of Lighting arresters.
- System Earthing (Inverters, structures, Lighting arrester, ACDB).
- DC wiring.
- Installation of inverters & wiring for Inverters
Open Access
Open access projects are typically set up for power supply to industrial consumers, who pay relatively high tariffs for often erratic power supply from the grid. Which allows a buyer with a connected load of more than 1 MW to procure power directly from the market through the grid. Open access projects are typically set up for power supply to industrial consumers, who pay relatively high tariffs for often erratic power supply from the grid
Solar Parks
When it comes solar park consultants in India, Spica offers the expertise as well as tools required to provide the best possible solution to clients across categories. Right from conceptualisation to installation, Spica Power offer an extensive bouquet of services that helps industrial units adapt to the solar way of manufacturing.
Needless to say, solar panel installation brings with it, the advantages of the process becoming cost effective, eco friendly and more efficient. Additionally, Solar panels reduce the reliance on electricity and power coming from non-renewable sources of energy.
Here is a look at the various services that Spica Power is able to offer:
Approvals and Liasoning
Approvals and Liasoning forms mostly initial phase of development of plant that includes-
(A) Project registration at MNRE (Ministry of Non Renewable Energy) nodal agency
(B) LTOA (Long Term Open Agreement) related works
(C) Plant commissioning certificate
(D) PPA (power purchase agreement) with private/government
(E) Land related paper work
(F) REC (Renewable Energy Certificate) related SLDC Registration,
(G) Accreditation Certificate
(H) NLDC Registration
On-grid net metering projects
Net metering means,the solar enegr produces is more than what the building loads consume,the surplus energy will automatically be export to the TNEB distribution network)the grid).If there is loss solsr energy then what the loads of the building require,the shortfall will be drawn from the grid(energy import).
For solar net-metering to be implemented the existing TNEB service connection meter needs to be replaced with a meter that can measure both energy import(from the grid to the consumer)and energy import(from the consumer to the grid).These meters are known as bi-directional meters or import-export energy meters
Solutions for Petrol Pump Stations, Diesel/Petrol, Remote Fuel Stations, Highway Fuel Stations, GAS Fuel Stations, etc.
Solution for Fuel stations
Why Use Solar Powered Stations?
- Reduce your dependence on highly inflating Diesel fuel for backup requirements.
- Get your Solar PV & Electricity monitored & usage informed to you.
- Freedom from Erratic Govt, and fuel cost decisions.
- Efficiently use your Solar petrol pump Roof-top
Reducing Carbon Footprint of Carbon Generating Stations and Still Save Monsey!
- Solutions available from 1KW and Above
- On-grid solutions to reduce electricity bills
- Single phase and Three phase pumping solutions
- Replacing existing polluting DG running on highly inflating Diesel costs through Solar PV installation on Petrol Pump Canopies
- Off-Grid Solutions to run pumps in case of power failures
Agriculture solar pump
Spica solar pumping system consists of solar pumping inverter, pump and PW array. Consider that storing water is more efficient than storing electricity, the system is designed to directly drive the pump without battery which can reduce the construction and operating cost and routine maintenance effectively.
The PV array consists of multiple solar panels connected in series/parallel, which can supply the whole system as a power source by convening the absorbed solar radiation energy to the electrical energy. Solar pumping inverter can implement the control of the whole system operation, which drives the pump by convening DC power produced by the PV array to AC power. This inverter can adjust the output frequency according to the solar irradiation intensity in real time to implement the MPPT (maximum power point tracking).
The pump driven by a 3-phase AC motor draws water from deep-well or river. The pumped water is then fed into reservoir or water tank, or connected to the irrigation system or fountain system directly. All of centrifugal pump, axial-flow pump, mixed-flow pump, and deep-well pump can be utilized
1.Elite power fully automatic operate, without on duty. Solar Water Pumping System is composed of solar cell arrays, pump inverter and water pump. Water storage replaces battery and directly drives pumping, with high reliability, at the same time, it can reduce system cost and maintenance costs.
2.According to the sunlight intensity to adjust pump speed, the output power close to the solar array maximum power; when the sunshine is sufficient, pump speed does not exceed the rated speed; when sunlight is insufficient, it will automatic stop working according to the minimum operating frequency.
3.Water pump is driven by three phase AC inverter. Pumping water from the deep well or rivers and lakes is poured into the water tank/pool, or directly connect irrigation system and fountain systems. To choose water pump depends on actual demands and installation conditions
Street Light
Solar Street Lights are well-designed to illuminate large areas with the highest intensity of light. These are used for commercial quality lighting systems, residential streets, parking lots and security lighting using high quality of solar systems.
Natural power offers Solar Energy Street lamp with highly efficient induction based technology and sealed maintenance free solar batteries for power supply. The Power of these lights starts from: 15 – 200 W.
Types of solar street lights:
Solar street lights are generally classified into two types:
1) .Standalone solar street lights Standalone solar street lights have photovoltaic panels mounted on the structure. Each street light has its own photovoltaic panels and is independent of the other lamp
2) .Centrally operated solar street lights.
In this type, the photovoltaic panels for a group of street lights are mounted separately. All the street lights in a particular group are connected to this central power source.
Solar Street Light System is a standalone system, comprising of a compact fluorescent lamp, lead acid battery, PV modules; electronics inter connecting wires or cables, module mounting hardware & a battery box. The Street Light works on Battery backup, which is charged by Solar Photo-voltaic Panels. It can work for three sunless days, and operates automatically from dusk to dawn. A maximum distance of 15 meters between two street lights should be maintained.
Spica power Solar Street Light is protected from the battery over charging and over discharging, and from over load. These indications are provided on the battery box itself.
- Solar Panel: over 25 years of power generation capacity
- LED Light: LEDs provide super-bright light from little power, need simple thermal management, and last up to 50,000 hours, with a 2-year warranty. LED wattage is equivalent to approximately half the wattage of high pressure sodium light.
- Controller: over 8 years of typical operating life, with a 2-year warranty, automatic operation from dusk to dawn or timed ON/OFF operation
- Pole: up to 25 years of long life time
- Battery: 5 ~ 7 years of maximum life, with a 2-year warranty
